Stabilizing 24000rpm 1.5KW CNC Router Spindle High Processing Precision 7.2KG

This spindle motor adopts Germany imported bearing which can make it use for three    times longer useful time than ordinary spindle motor.

Competitive Advantage:

1,Infinitely variable speed transmission for frequency changer with wide speed range
2,Low noise, little vibration, good stability, high processing precision
3,Adopt the ceramic core Aerial plug, more safe and reliable

Specifications:

Spindle mode:NYM80-24Z/1.5
Spindle parametric:                                    Overall size(mm):
Frequency:400Hz                                       D:80
Rotating speed: 24000rpm                              D1:60
Power:1.5Kw                                           L:210
Voltage:220V                                           L1:10
Electric current:6A                                      L2:26
Connect mode:ER16
Tool holder’s diameter:0.5-10mm(Factory standard: 2 fillings)
Taper hole of spindle runout:≤0.003mm
Mandrel runout:≤0.008mm
Lubricating mode: grease
Cooling mode:water
Bearings mode:2*7004   1*7002
Weight:7.2KG

Description:

Tool changing structure is advanced so that the signal and tool changing movement could be reliable and stable. It adopts four-pole motor-driven system and the ISO20 knife handle,  The multichamber protective measure including double-layer sealing device and air sealing conformation can efficaciously provide liquid from getting in and keep Motor Spindle working for a long time. could usually be used in the quick processing of different materials with Φ3~Φ10 blade from 24000rpm to 30000rpm.The GMN import bearings and engine oil are used to ensure high performance of the spindle. GDL80 series Motor Spindle is the automatic tools changing spindle designed by our company.

Applications:

Applicable scope: This product is suitable for Engraving machine or Engraving and milling machine and Lock industry. It is mainly used for the circular carving and drilling and milling of the matrix, spectacles and jewelry.

Notes for Use of Motor Spindle 

1,Motor spindle should be compatible with frequency converter. The specification and parameter setup of  frequency converter should match the rated parameters of spindle. If not, spindle would burn out.
2,Before using the water-cooled motor spindle, it must be ensured that the cooling system is working properly and working without cooling condition is strictly forbidden. Cooling water calculate by 1 liter per kilowatt minute. The minimum flow rate of cooling water is not less than 5 liters per minute. The cooling water pipe and the water nozzle connection must be reliable to prevent leakage.
3,Knock on the spindle end cover, collet and cutterhead when remove bit is forbidden. No bump in the process of saving, transporting and using motor spindles especially the end cover.
4,The spindle should rotate in the specific direction.
5,Please refer to the instruction manual when store the spindle.
6,Cooling the spindle by water cooling machine should control the temperature between 22 to 25.