High Torque 3500W CNC Machine Spindle with Two Pole Six pole Motor-driven System

Packing & Delivery :

Packing:carton(wooden case if it`s necessary)
We will deliver the goods by Fedex/DHL/UPS/ express to you within three days and 
Email the tracking number to you immediately, which We will change the best price for you.
Delivery time: 5-7 working days

Description:

Depth of parallelism within 0.002mm and Perpendicularity within 0.002mm are necessary.Our high speed motor spindle utilizes hydraulic pull weights imported from German to measure the spindle’s pull accurately. The spindle leaving the factory is promised to run all for an integral test process so that the time of machine tool manufactors’ running time and machine tools delivery time could all be shortened.The assemble and install step is adjusted according to standard correction program when tightening the nut and is tightened by torque wrench within criterion, which make us not to correct the spindle by adjust the nut. The GDZ High Speed Motor Spindle researched and developed by our company has low noise and high accuracy characteristics. It adopts two-pole to six-pole motor-driven system and the spindle is made by the nickel chromium molybdenum alloying steels through standard heat treatment program to reach the requirement of high accuracy and stability.  Balance test should use the computerized balancer machine to check the precise balance of spindle with full speed. Assemble and install area’s temperature is controlled by the thermostatic air conditioner within accurate fit tolerance. 

Specifications:

Spindle mode:NYM110-9-21Z/3.5

Taper hole of spindle runout:≤0.003mm
Mandrel runout:≤0.008mm
Lubricating mode: grease
Cooling mode:water
Bearings mode:2*7007   2*7004
Spindle parametric:                                    Overall size(mm):
Frequency:800Hz                                       D:110
Rotating speed:9000-21000rpm                         D1:85
Power:3.5Kw                                           L:270
Voltage:380V                                           L1:37
Electric current:8A                                      L2:31
Connect mode:ER25
Tool holder’s diameter:1-16mm(Factory standard: 2 fillings)
Weight:17.5KG

Applications:

Applicable scope: This product is suitable for Engraving machine or Engraving and milling machine and Lock industry. It is mainly used for the circular carving and drilling and milling of the hardware, glassworks and woodworks.

Competitive Advantage:

Product features:
1,  Infinitely variable speed transmission for frequency changer with wide speed range
2,good stability, high processing precision,Low noise, little vibration, 
3,High rotating speed used for engraving and milling or fine machining. This product has wide application.
4, Adopt the ceramic core Aerial plug, more safe and reliable
5, The front end of the bearing use the water-cooling equipment , the cooling effect of the spindle is better.

6, The durable years of the Bearings gets more longer.

Constant power spindle with low rotating speed and high torque; Low rotating speed used for drilling and milling or rough machining; 

After-sale protection:

Bearing warranty last for half a year,Machine quality assurance last for a year.

Notes for Use of Motor Spindle: 

1, Coolant must be clean and free of grease. Temperature should be controlled in 5 to 30 degrees. If the ambient temperature is above 30 degrees, the cooling medium must be forced to cool. Precision machining machine requires coolant temperature at 20 degrees positive or negative 2 degrees.
2, Running must start from the minimum speed of the spindle and add speed to differential growth by 3000rpm after 30 minutes. Each level is run in 20 minutes. If just start using in high speed without running, abnormal noise and heat would happen then the using life will be shortened. In the long-term use of the electric spindle, it should be working(in low speed) at least 15 to 30 minutes within one week.
3, When stored clamping tool on electric spindle, the collet , nut and tapered bore must be cleaned to ensure accuracy. The hilt is inserted into the collet must be greater than 15 mm.
4, Knock on the spindle end cover, collet and cutterhead when remove bit is forbidden. No bump in the process of saving, transporting and using motor spindles especially the end cover.
5, Please refer to the instruction manual when store the spindle.
6, Cooling the spindle by water cooling machine should control the temperature between 22 to 25.